48+Locations covered
Heavy equipment & industrial suppliesFocus
One message, no obligationHow it works

2000kVA Jenbacher Gas Generator for Sale in Port Harcourt

A 2000kVA Jenbacher Gas Generator gives about 1600 kW of real power at a 0.8 power factor, and a buyer in Port Harcourt should settle the gas supply before the set, because a gas generator is only as good as its fuel line.

Request 2000kVA Jenbacher Quote Email Us Instead See what to send →

Industrial diesel generator set in an outdoor enclosure

Verified Supplier Network

We do not publish a single price for a 2000kVA Jenbacher, because it swings with frequency, condition, canopy and the exchange rate. Send your specification and we will connect you with suppliers who can quote for Port Harcourt.

Port Harcourt demand comes from onshore oil and gas yards, offshore support bases, marine logistics, petrochemical sites and the construction work around them.

Get an Accurate Quote

Share these details on WhatsApp and we'll match you with the right supplier faster.

Frequency: 50Hz or 60Hz, and voltage
Fuel: gas (pipeline, CNG or LNG) and gas supply details
Prime power or standby duty
Onshore or offshore installation
Open set, soundproof canopy or containerised
New or fairly used, and maximum engine hours
Quantity, delivery location and required date

Send Your Requirement Email Us Instead

Verified suppliers

We route your request to vetted equipment and materials suppliers, not random contacts.

One message, multiple quotes

Send your specification once on WhatsApp and get matched with relevant providers.

No obligation to buy

Compare pricing and availability from a supplier before you commit to anything.

Gas or Diesel?

A gas set needs a reliable supply: pipeline gas, compressed natural gas (CNG) or LNG. Confirm availability, pressure and price per unit at site before you choose gas over diesel
Gas quality matters. Methane content and calorific value change the output, so ask the supplier for the rating on your gas, not only the nameplate
Where gas is dependable, fuel can cost less per kWh than diesel, but the set and the gas train usually cost more up front and take longer to supply
Diesel stays simpler where there is no gas supply, and many sites run diesel as backup to gas

Buying a Jenbacher 2000kVA Gas Set in Port Harcourt

Port Harcourt demand comes from onshore oil and gas yards, offshore support bases, marine logistics, petrochemical sites and the construction work around them.
Sets arrive through Onne or the Port Harcourt port and move by road to yards in Trans-Amadi, Eleme and the wider Rivers State. Wet-season road conditions can change the delivery window.
Confirm weight, footprint and lifting points on the data sheet, and plan a concrete plinth and crane or skid positioning at site

Onshore and Offshore Use

Onshore: factories, estates, hospitals, malls, flow stations and processing plants, usually on 50Hz grid backup or prime power
Offshore and marine support: platform and vessel installations normally need a set built and certified to the platform's or vessel's class rules, and often 60Hz, so a standard onshore set is generally not enough
Tell us whether the set goes onshore or offshore when you ask, because it changes the frequency, enclosure and certification you need

What to Check Before You Pay

Frequency (50Hz or 60Hz), voltage and phase on the rating plate, not only in the advert
Engine hours, service history and whether the set was prime or standby duty
A load-bank test at 75% load or more, with the readings recorded
Alternator insulation test, coolant and oil condition, and turbocharger condition
Gas train, regulator and ignition system condition, and the gas specification the set was rated on
Control panel type, whether an ATS is included, and what the warranty covers

50Hz or 60Hz in Port Harcourt

Nigeria's grid runs at 50Hz, so a set that backs up the grid or runs beside it has to be 50Hz
This is the Nigerian city where 60Hz requests are most common, because oil and gas equipment and offshore support gear is often built to 60Hz standards. Confirm the frequency of the equipment the set will feed before you buy.
A 60Hz set runs its engine at a higher speed (typically 1,800 rpm against 1,500 rpm at 50Hz) and is usually rated higher on the same engine, often by roughly 15 to 20 percent, so compare kVA ratings at the same frequency
A 60Hz set cannot feed a 50Hz network. Motors run fast and transformers can overheat unless a frequency converter is used

2000kVA Jenbacher Gas Generator at a Glance (50Hz)

Real power at 0.8 power factor: about 1600 kW
Full-load current at 415 V three-phase: about 2782 A
Gas use depends on engine efficiency and load, so ask for the manufacturer's gas consumption curve for the exact model
Jenbacher sets are built on Jenbacher (GE) gas engines. Confirm the exact model and build year on the supplier's data sheet

How to source 2000kVA Jenbacher Gas Generator for Sale in Port Harcourt

Send your requirement on WhatsApp
Tell us what you need (2000kVA Jenbacher Gas Generator for Sale in Port Harcourt), the quantity and your delivery location. One message is enough to start.
We match you with relevant suppliers
We route your request to independent suppliers who deal in this equipment and can serve your location.
Compare quotes and buy direct
Review pricing and availability from the supplier. Contracts, payment and delivery are agreed directly with them, with no obligation to buy.

Frequently Asked Questions

How much does a 2000kVA Jenbacher gas generator cost in Port Harcourt?

We do not publish a fixed price, because it moves with frequency, new or used condition, engine hours, canopy, control panel, delivery to Port Harcourt and the exchange rate. Send your requirement on WhatsApp and we will get comparable quotes.

Is a Jenbacher 2000kVA generator 50Hz or 60Hz?

Jenbacher builds this size for both frequencies, and the rating differs between them. Nigeria's grid is 50Hz, so choose 50Hz for grid backup and choose 60Hz only when the equipment it powers is built for 60Hz.

Is a gas generator cheaper to run than diesel?

It can be, where gas is dependable and priced well, but it depends on the gas price, supply and the set's efficiency. A gas set also needs a gas supply and usually costs more up front. We do not quote prices, so ask your supplier for fuel use on your gas.

Can a 60Hz generator power Nigerian grid loads?

Not directly. A 60Hz set produces 60Hz output, so 50Hz motors run about 20 percent fast and transformers and sensitive electronics can be damaged. Use a frequency converter or choose a 50Hz set.

Can this generator be used offshore?

Offshore and marine installations normally need a set built and certified to the platform's or vessel's class rules, so a standard onshore set is generally not enough. Tell us the requirement and we will ask suppliers what they can certify.

Can you help me source one in Port Harcourt?

Yes. Tell us the frequency, gas supply, quantity and site location on WhatsApp, and we will connect you with suppliers who can deliver to Port Harcourt.